|
Easy
and comfortable
|
With
the 781 pH/Ion Meter you can measure pH values and determine the
content of different ions using ion-selective electrodes. The determinations
are either performed by establishing calibration curves or by performing
standard additions; both of which can be automated with an attached
765
or 776
Dosimat. For the fully automatic standard addition you need only
enter the concentration of your standard and the desired number
of additions, the rest is taken care of by the pH/Ion Meter. Any
name can be used for the determined species and the result unit
is freely selectable.
|
|
781
pH/Ion Meter with stirrer
|
 |
|
Switch
on and measure

|
-
Measuring
ion concentration by means of direct measurement, standard additions
or sample additions
-
Inherent
quality control tool: pH electrode test for standard electrodes,
gel electrodes and electrodes for non-aqueous media
-
Graphics
display grants overview and facilitates operation
-
Calibration
with automatic buffer recognition, up to 9 calibration buffers
-
Recall
of stored calibration data including curves
-
Plot
function pH, U, T, Conc. versus time on printer
-
Result
memory for up to 100 results
-
Stirrer
control by the pH meter ensures reproducible measuring results
-
Entering
of calibration interval with reminder
-
Automatic
recognition and control of stirrer via "Metrohm Serial Bus"
-
Plot
function pH, U, T, Conc. versus time on printer
|
| Ranges |
| Measuring ranges |
pH: 0...14 (±20.000),
Potential: U ±2000.0 mV,
Temperature: T (Pt1000) -150.0...+250.0 °C,
NTC -20 °C...+250 °C |
| Resolution |
Delta pH 0.001
Delta U 0.1 mV
Delta T 0.1 °C/°F |
|
| Sensors |
You can obtain
the following Metrosensor ion-selective electrodes from us:
- with crystal
membrane: F-, Cl-, Pb2+, Cu2+,
Ag+, S2-, CN-
- with polymer
membrane: Na+, Ca2+, NO3-,
K+, BF4-
- with glass
membrane: Na+
|
|
If you wish
to get more information on the 781 pH and Ion Meter you may either
submit our reply form or send an e-mail to Chennai@mdml.com.
|
|