780 pH Meter

Top-level pH Meter

Flexible and easy to operate

Metrohm's new pH meter generation offers numerous possibilities. In addition to the general functions for measuring pH, potential and temperature, the new pH meters boast features such as the optimized, GLP-compliant electrode test as well as monitoring and service intervals. also the stirrers have been optimized. They are now directly controlled by the pH meter via the MSB interface (MSB = Metrohm Serial Bus). The stirring speed is set on the pH Meter. This assures that measurements are always carried out under the same conditions. You can choose between the 801 Magnetic Stirrer and the 802 Rod Stirrer.

780 pH Meter with stirrer

Practical quality control

Inherent quality control tool: pH electrode test for standard electrodes, gel electrodes and electrodes for non-aqueous media
Automatic temperature compensation for pH measurements
Automatic electrode test with graphics printout for pH electrodes (GLP, ISO 9000)
Automatic recognition of the following buffer sets: Metrohm, Merck, Fisher, Fluka BS, Mettler, Beckman, Radiometer, DIN/NIST (NBS) as well as special buffers
Automatic recognition and control of stirrer via "Metrohm Serial Bus"
Multipoint calibration with max. 9 buffers
Easy operation thanks to large display
Plot function pH, U, T, Conc. versus time on printer
Recall of stored calibration data including curves
Entering of calibration interval with reminder

Ranges

Measuring ranges	pH: 0...14 (±20.000), Potential: U ±2200.0 mV, Temperature: T (Pt1000) -150.0...+250.0 °C, NTC -20 °C...+250 °C
Resolution	Delta pH 0.001 Delta U 0.1 mV Delta T 0.1 °C/°F

If you wish to get more information on the 780 pH Meter you may either submit our reply form or send an e-mail to Chennai@mdml.com.

Home

What's New

Back